I just used this stuff on a set of vertical hammers and was impressed. Later I had to remove one of them, and with a little heat it came right off. I'mm impressed. It's also thick, so doesn't run, and it sets up quickly. It's available also at local hardware stores. les bartlett -----Original Message----- From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org]On Behalf Of Keith Roberts Sent: Monday, January 09, 2006 10:48 PM To: College and University Technicians Subject: Re: [CAUT] Hot Hide glue woes (??) Can you dab some on the damper heads, set the felts into it, make sure they are aligned, press them down, recheck alignment and set it down and go to the next one assured that it's not moving? kpiano ----- Original Message ----- From: "Chris Solliday" <solliday@ptd.net> To: <johnsond@stolaf.edu>; "College and University Technicians" <caut@ptg.org> Sent: Monday, January 09, 2006 7:16 PM Subject: Re: [CAUT] Hot Hide glue woes (??) > List, I don't know why you all use this sticky old stuff for hammers anyway. > Tite-bond Molding Glue doesn't drip, makes a nice clear when dry collar, > doesn't fail, is easy to remove, and did I mention it doesn't stink. OH and > you can get it from Pianotek too. > Chris Solliday > ----- Original Message ----- > From: "Dennis Johnson" <johnsond@stolaf.edu> > To: "College and University Technicians" <caut@ptg.org> > Sent: Monday, January 09, 2006 12:36 PM > Subject: Re: [CAUT] Hot Hide glue woes (??) > > > > Michelle- > > > > Generally Pianotek sells a high quality glue. I don't pretend to be an > > expect on the stuff, but there is a variation of fat content. Overall, > > the lighter the color the leaner and higher quality it is. I have some > > old dark colored stuff I avoid using, but keep around anyway. You can > > also tell by the smell. The good stuff doesn't smell so bad. In the > > end you should be able to make it work, but maybe it was a bad batch. > > > > Dennis Johnson > > St. Olaf College > > > > _______________________________________________ > > caut list info: https://www.moypiano.com/resources/#archives > > > > > > > _______________________________________________ > caut list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ caut list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC