Jim, Now you've got me curious about this heating device. Could you explain or is it still under patent. ;-) Marcel > -----Message d'origine----- > De : caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] De la > part de James Ellis > Envoyé : 11 novembre 2006 15:43 > À : caut at ptg.org > Objet : Re: [CAUT] Tight Balancier > > > Marcel Carey is correct. I saw that Kawai high-speed film > too, and it is possible to have a jack so loose, and cushion > felts so bouncy, that at just the right repetition speed the > jack will bounce and end up in exactly the wrong place at the > wrong time, causing repetition to fail. > > On the other hand, not long ago I was filling in for another > technician, and I ended up tuning for two different concerts > in two different places on the same evening. I had just > finished tuning one piano when I got a frantic call from the > manager of the other orchestra, which was having final > rehearsal before performance. Several notes were failing to > play at all. The other location was only 20 miles away, and > I got there ASAP. The jacks were too tight. The relative > humidity had increased, and the jacks got even tighter. They > were failing to return at any speed. A careful application > of shrinking solution followed by some heat from a neat > little device I had made that heats only the spots that need > to be heated, and all was well. The pianist wanted me to do > a stand-by during performance. I told her why I couldn't, > but I assured her that the problem was fixed, and she would > have no problem. > > WARNING: Do NOT try the heat thing on jack centers using a > heat gun, or you may cause the jack tenders to come loose. > > Jim Ellis > >
This PTG archive page provided courtesy of Moy Piano Service, LLC