Use a black light...;-] David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Joe And Penny Goss" To: "College and University Technicians" Received: 8/4/2007 7:30:19 PM Subject: Re: [CAUT] Black on Black... (Jack alignment) Hi Jim, Try shining a light from the side. Mini LED or mag light. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Jim Busby To: College and University Technicians Sent: Saturday, August 04, 2007 7:20 PM Subject: [CAUT] Black on Black... (Jack alignment) List, Don Help! Do any of you have a trick for seeing the new Kawai parts, namely for doing the jack to knuckle alignment? I truly cant see the black parts/plane of the jack. (My eyes are bad, but this is way worse for me) Ive got some good lights and such, but its still difficult. Ive been tempted to paint white-out on the backs of the jacks Love the parts, but these old eyes dont get it done anymore. Any tricks out there? Am I the only one experiencing this? Thanks, Jim Busby BYU -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070804/dde69fe8/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC