You had to have the Hawaiian time at the top of that post didn't you...? ;-] David Ilvedson, RPT Pacifica, CA 94044 Original message From: Wimblees at aol.com To: caut at ptg.org Received: 8/5/2007 12:16:59 PM Subject: Re: [CAUT] Black on Black... (Jack alignment) In a message dated 8/4/07 3:21:58 P.M. Hawaiian Standard Time, jim_busby at byu.edu writes: List, Don⦠Help! Do any of you have a trick for seeing the new Kawai parts, namely for doing the jack to knuckle alignment? I truly canât see the black parts/plane of the jack. (My eyes are bad, but this is way worse for me) Iâve got some good lights and such, but itâs still difficult. Iâve been tempted to paint white-out on the backs of the jacks⦠Love the parts, but these old eyes donât get it done anymore. Any tricks out there? Am I the only one experiencing this? Thanks, Jim Busby BYU Jim Are you adjusting the jacks with you standing at the back of the action? Standing so that the hammers are in front of you, lift up a couple of hammers to the right of the jack you want to adjust, and push down on the balancier of the wippen you're adjusting. From this angle, you can adjust the jack so that it is in a straight line with the core. Wim Get a sneak peek of the all-new AOL.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070805/60642faf/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC