Hi Folks (at least those of you still out there), I'm about to repin a not-too-old pinblock. It had 2/0 pins and I'm gonna use LoTorq 3/0 pins. The block felt fine. I'm restringing because of other issues with this piano - wildly mismatched bass strings, false beats and such. I'd like to find out how other folks treat the block before re-pinning. Anyone ream? With what type of bit? I have tried reaming with a double-fluted reamer in the past but didn't like the results. Too inconsistent. I've also just done nothing to the block, with good results. Your thoughts would be appreciated. Thanks. Alan -- Alan McCoy, RPT Eastern Washington University amccoy at mail.ewu.edu 509-359-4627
This PTG archive page provided courtesy of Moy Piano Service, LLC