[CAUT] capo work

[Jim Busby]

Paul,

Here's the files;

http://www.stewmac.com/shop/Fretting_supplies/Shaping_and_crowning/2/Diamond_Fret_Files.html

The 300 grit is all I have.

Jim



________________________________
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jim Busby
Sent: Monday, December 10, 2007 8:48 AM
To: College and University Technicians
Subject: Re: [CAUT] capo work

Google "Stewart MacDonald". Look for diamond fret files. I asked about the radius specs over the phone and can't remember which one was best but I do know the small WON'T work. I'll see if I can give you better info later.

Jim

________________________________
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Paul T Williams
Sent: Monday, December 10, 2007 8:35 AM
To: College and University Technicians
Subject: Re: [CAUT] capo work


Jim

Where does one get one of these?

Paul


Jim Busby <jim_busby at byu.edu>
Sent by: caut-bounces at ptg.org

12/10/2007 07:22 AM
Please respond to
College and University Technicians <caut at ptg.org>


To

"ilvey at sbcglobal.net" <ilvey at sbcglobal.net>, College and University        Technicians <caut at ptg.org>

cc



Subject

Re: [CAUT] capo work










Hi David,

Stewart MacDonald guitar fret files are the best. DON'T get the cheaper ones. Get the diamond files. They work quickly with 150 and 300 grits, and then follow with 400 and 600 sandpaper and buff. 15 minutes tops. Perfect every time.

Jim Busby BYU


________________________________

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Ilvedson
Sent: Sunday, December 09, 2007 1:11 PM
To: caut at ptg.org; pianotech at ptg.org
Subject: [CAUT] capo work

What are techs using to file capo bars before restringing?   I've read that guitar fret files were being used...I'm interested in the type of file and any technique used.  I'm thinking a 2 mm radius...?   I am reading the archives on this and some good articles in the Journal...

David Ilvedson, RPT
Pacifica, CA 94044
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20071210/acec8b70/attachment.html