David: I got a box of these and I've installed 5 so far. I put 2 on a D that had severe killer-octave-itis and it made a dramatic difference. The other 3 pianos (with one each) it made more of a subtle difference but it was a help. The main trouble with them is that normally the place where the sounding board needs that additional support is the most difficult place to install them. I think one should have a body at least 15 years younger than mine but if you're stubborn (I am) and you close the shop door so no one can hear you speak 4-letter-word incantations it can be done. I think these are going to prove to be one of the better, cost effective killer octave remedies available. dave David M. Porritt, RPT dporritt at smu.edu -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of David Love Sent: Tuesday, December 11, 2007 8:51 PM To: 'College and University Technicians' Subject: Re: [CAUT] Lack of low-frequency response You bought a box of 10? From whom, might I ask--just in case I don't want to have to make them myself. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon Page Sent: Tuesday, December 11, 2007 4:45 PM To: caut at ptg.org Subject: [CAUT] Lack of low-frequency response Try the Fandrich Riblets to add stiffness. I recently received my box of 10 and am looking/waiting for a victim. -- Regards, Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC