Oops. Forgot to include the link. Sorry. Avery https://www.moypiano.com/ptg/pianotech.php/2000-February/059279.html ---------- Forwarded message ---------- From: Avery Todd <ptuner1 at gmail.com> Date: Dec 12, 2007 7:45 AM Subject: Re: [CAUT] Old Knabe To: College and University Technicians caut at ptg.org List, In case anyone else is interested in reading it, here's a link for the post that Les Smith made around 1988. Susan Klein reposted it in answer to a question about those dampers. Thanks to everyone who's responded to my post. Obviously, since I can't see my own posts, I can at least see the responses. And I WILL figure that out. <grin> Avery Todd, RPT On Dec 11, 2007 6:43 PM, Jon Page <jonpage at comcast.net> wrote: > Avery, into each life some rain must fall. You're going to get soaked. > > You have to first raise the upstop rail. The screws are hiding back > there somewhere. > Once that is lifted, you can raise the damper, and flip the top > treble ones upside- > down to unscrew from the top flange. The heads can be centered over the unison > with the screw motion. > > Check the archives. either Les Smith or Newton Hunt posted some detailed > info on these many, many years ago. > > Regards, > > Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20071212/4d3f172e/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC