Hey, Alan, Some years ago a lady demonstrated a steam cleaner at convention, using it to remove key bushings and resize balance holes. They¹re pretty expensive, but work quite well. Here¹s a link: http://www.etpetersen.com/vacs/vapor_main.htm The one she had was the Sgt Steam. Regards, Ken Z. On 7/19/07 7:23 AM, "reggaepass at aol.com" <reggaepass at aol.com> wrote: > Hi List, > > I would like to use steam on an upcoming key bushing job, but have not been > able to find any of the handy devices my colleagues have online. Any > suggestions for an off-the-shelf, hold-it-in-your-hand gizmo capable of > producing a fine, steady stream of steam? > > Thanks, > > Alan Eder > > AOL now offers free email to everyone. Find out more about what's free from > AOL at AOL.com <http://www.aol.com?ncid=AOLAOF00020000000437> . > -- Ken Zahringer, RPT University of Missouri School of Music -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20070719/bb3c5285/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC