[CAUT] Bushing cloth thickness

[Elwood Doss]

Hi Jon,
Pardon my lame brain, but what does KBI stand for?  Thanks!
Joy!
Elwood

Elwood Doss, Jr., M.M.E., RPT
Piano Technician/Technical Director
Department of Music
145 Fine Arts Building
The University of Tennessee at Martin
Martin, TN  38238
731/881-1852
FAX: 731/881-7415
HOME: 731/587-5700

-----Original Message-----
From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of
Jon Page
Sent: Tuesday, July 31, 2007 12:41 PM
To: caut at ptg.org
Subject: [CAUT] Bushing cloth thickness

Spring clamps will not uniformly space the gap in the b/r hole and cauls
will help with compression set.  The glue should be thick enough not to
wick
into the felt too far.

The felt swells more then the wood otherwise the KBI would not be as
effective.
-- 

Regards,

Jon Page