[CAUT] S&S hammer flange rail material

[Tim Geinert]

This thread has been highly beneficial to me.  Thank you to all.

Tim G

On Aug 19, 2008, at 12:09 PM, Alan McCoy wrote:

> Wow, I like it! I heated up the beeswax in my hot pot. Applied a  
> tiny amount
> with a brush onto the braid that was already stuck on the rail.  
> Then heated
> it slightly with a heat gun. The wax melted into the cloth and not  
> only
> firmed it up but made it slightly sticky. Just like waxing skis  
> will give
> you purchase in the snow for climbing.
>
> Alan
>
>>
>> firms the stringing braid so it doesn't slide so much, only put it  
>> on the
>> top side
>
>>
>
>