Brass half rounds or ovals installed through the tenor section at the top of the slope with some soft felt between the brass and the agraffes that applies enough pressure to damp unwanted noise but not create any drag. I find that felting between the brass and the tuning pins is unnecessary. David Love davidlovepianos at comcast.net www.davidlovepianos.com -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon Page Sent: Thursday, January 10, 2008 4:07 PM To: caut at ptg.org Subject: [CAUT] Fiberboard But I'm still curious, what are the rest of you using Ditch the fiberboard counter bearing and install brass half-rounds or half-ovals. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/caut.php/attachments/20080110/dc15e82f/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC