[CAUT] existing pinblock prep

[Joe And Penny Goss]

[CAUT] existing pinblock prepJust another way,
I have a dedicated marked plier that I use to make the becket. Round on the outside and flat inside the smooth jaws.
Mostly eliminates mistrakes when the wire slips in my hands.
SP Police? <g>
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Jon Page 
  To: caut at ptg.org 
  Sent: Saturday, July 26, 2008 8:35 PM
  Subject: [CAUT] existing pinblock prep


    and found that I obviously wouldn't be able 
    to use my normal cranking technique: just hold the pin between 
    (leather covered) thumb and index finger.



  I brace the pin on the first knuckle of my index finger as the thumb
  forces the becket bend and coil.
-- 

  Regards,

  Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/caut.php/attachments/20080727/36843505/attachment.html