Remove the lid prop block and there should be a screw under it helping hold the music desk support it place. Tim Coates Tim Coates -----Original Message----- From: "Dr. Henry Nicolaides" <drsnic4 at hotmail.com> Date: Mon, 17 Aug 2009 18:36:54 To: College and University Technicians<caut at ptg.org> Subject: [CAUT] pin block removal Hi List, I need to remove a pinblock from a new (7year old) Yamaha S6 due to water damage. It appears to be glued and possibly secured to the front strecher bar with dowels. Any one have experience with Boldue Pinblock Removal Jig? Also, I am having difficulty removing the right music desk support, the lid prop hinge is screwed to the end. The left one came off the case easily. Simply removed the screws and tapped gently. The right one, however is not. I am a bit hesitant not wanting to damage the otherwise good gloss black polyester finish. Is there screws that I am missing. I haven't called Yamaha yet. I did find out that Yamaha does not stock replacement pin blocks. They suggested Bolduc. Thanks, Henry Nicolaides Piano Technician, SIU School of Music 1000 S. Normal Ave. Carbondale, IL 62901 email: henryn at siu.edu _________________________________________________________________ With Windows Live, you can organize, edit, and share your photos. http://www.windowslive.com/Desktop/PhotoGallery -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20090817/d41fbe7d/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC