[CAUT] lubing ponder

[Richard Brekne]

Goes quickly enough... use your burnishing tool. Dip it in the powder 
and run it through the bushing. Works great... lasts a long time.

RicB

    That must take a bit of time...swab with what?

    David Ilvedson, RPT
    Pacifica, CA  94044


I use so called German silver center pins.  I dont treat them at all, 
but ream the bushings to clean out as much whatever as there is there, 
and swab with teflon powder before inserting the pins.

Cheers

RicB