[CAUT] Underlever Felt

[David Ilvedson]

Jon,

"can be finessed individually on reinstallation"

What does that mean...

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Jon Page" <jonpage at comcast.net>
To: caut at ptg.org
Received: 8/24/2009 2:02:46 PM
Subject: Re: [CAUT] Underlever Felt


>>For this Baldwin SD 10 the underlever springs are hard to reach.
>>I'm wondering about the Hart tool that I use for rep. lever springs,
>>do you think that would work to reach in there and strengthen those springs?

>I don't think the springs can be rotated downwards enough, besides
>getting them back in the slot would be troublesome.  It is best to remove
>the tray and address the problem, this way the dampers can be finessed
>individually on reinstallation.

>-- 

>Regards,

>Jon Page