Jon, I think you're right. You can see where the strings are actually cutting grooves. I'm just not sure what to do where the angle is so acute. (by the break) Regards, Jim Busby -----Original Message----- From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Jon Page Sent: Thursday, May 21, 2009 1:08 PM To: caut at ptg.org Subject: Re: [CAUT] Mason A Pics This piano definitely needs a brass half-round or half-oval for the counter bearing. The felt between that and the agraffes and pins only needs to be thick enough to mute the wire and not cause drag. I've done this to S&S's and Baldwins with good results. -- Regards, Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC