[CAUT] Artist Bench

Porritt, David dporritt at mail.smu.edu
Tue Oct 13 08:58:01 MDT 2009


Fred:

Well, there's no wear in this one yet!  It is very quiet and less "wobbly" than the standard bench (there are fewer moving parts).  The pneumatic tube is oriented almost horizontal and attached to other levers that raise and lower the bench and keep it level.  I'm impressed with the engineering.

[cid:image001.jpg at 01CA4BEB.A65C3920]

[cid:image002.jpg at 01CA4BEB.A65C3920]


David M. Porritt, RPT
dporritt at smu.edu

From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of Fred Sturm
Sent: Tuesday, October 13, 2009 9:35 AM
To: caut at ptg.org
Subject: Re: [CAUT] Artist Bench

What about potential for noise, rocking and whatnot. Is it better in those respects than the standard bench?
Fred
On Oct 12, 2009, at 7:45 PM, Porritt, David wrote:


It's $595.00 + shipping.

dp


David M. Porritt, RPT
dporritt at smu.edu<mailto:dporritt at smu.edu>

From: caut-bounces at ptg.org<mailto:caut-bounces at ptg.org> [mailto:caut-bounces at ptg.org] On Behalf Of Andrew Anderson
Sent: Monday, October 12, 2009 6:57 PM
To: caut at ptg.org<mailto:caut at ptg.org>
Subject: Re: [CAUT] Artist Bench

David,
Do tell!  $$$?  We could use some in the studios here where the benches are always going up and down to accomodate students of widely varying stature.

Andrew Anderson
On Oct 12, 2009, at 4:14 PM, Porritt, David wrote:



We got a new artist bench for our larger recital hall today.  It's a bench that I didn't know existed until a few days ago.  Jansen makes a traditional looking pneumatic tube controlled bench.  It looks exactly like their regular ones except instead of having two knobs it has one lever.

It (as you would expect from Jansen) is very well designed and when you pull the lever it doesn't go down with a "thunk" like your pneumatic tube office chair.  It descends slowly, stops securely with no bounce or further sag.  I'm really pleased and impressed.  The only negative (if it is one) is that it is spendy!  That's why they don't have it listed in their catalog or on line.  You have to know to ask for it.

Our pianists who have been to Europe and seen some of the benches there have been asking about one.  When they sit down to play a 60 - 70 minute recital, the last thing they want to do is wear out their hands and arms cranking on an artist bench.  This solves that very nicely.  It's faster, and not tiring.

Can you tell?  I'm really happy with it.

dave
_________________________
David M. Porritt, RPT
Meadows School of the Arts
6101 Bishop Blvd.
Southern Methodist University
Dallas, TX 75275
dporritt at smu.edu<mailto:dporritt at smu.edu>






Regards,
Fred Sturm
University of New Mexico
fssturm at unm.edu<mailto:fssturm at unm.edu>





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20091013/90160f12/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 25790 bytes
Desc: image001.jpg
URL: <http://ptg.org/pipermail/caut.php/attachments/20091013/90160f12/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 26374 bytes
Desc: image002.jpg
URL: <http://ptg.org/pipermail/caut.php/attachments/20091013/90160f12/attachment-0003.jpg>


More information about the CAUT mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC