[CAUT] VS Profelt a Spirlock or aluminum cauls,

[Chris Solliday]

It is mostly water.
Chris
  ----- Original Message ----- 
  From: Porritt, David 
  To: caut at ptg.org 
  Sent: Saturday, April 03, 2010 11:38 AM
  Subject: Re: [CAUT] VS Profelt a Spirlock or aluminum cauls,


  Patrick:

   

  I suspect the reason he specifies brass cauls is because that's what Pianotek sells.  Shaff's are aluminum and Bills are polyethylene so naturally he refers to cauls as brass cauls.  I can't imagine that the chemical is strong enough to damage either of the other choices or it would hurt guide rail pins.

   

  dp

   

   

  David M. Porritt, RPT

  dporritt at smu.edu

   

  From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf Of James Patrick Draine
  Sent: Saturday, April 03, 2010 11:26 AM
  To: caut at ptg.org
  Subject: [CAUT] VS Profelt a Spirlock or aluminum cauls,

   

  Pianotek Supply's "technical article" on the usage of VS Profelt is very short. I have a set of keys that I wish to size/lube with this stuff, but my supply of cauls are are aluminum and polyethylene (Spurlock). The brief tech article states "Soaking the key bushings with VS Profelt and using a brass caul ...". Anyone know if the aluminum & polyethylene ones are also AOK? As some have stated that the mystery juice has alcohol content, I don't want to find that I'm melting plastic or leaching aluminum into the bushings.

  So, is everyone using brass cauls with this stuff, or are the other cauls just as good?

  Patrick Draine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/caut.php/attachments/20100403/f11996a3/attachment.htm>