[CAUT] FW: Tuners leave a trail

[Terry Beckingham]

It may only involve loosening one Philips screw, but on some of the U1s 
that I have encountered, the screw has been tightened so much that the head 
was stripped and a screwdriver would not loosen the screw. Kawai has a 
better idea, in that they use a wing nut instead. It works well every time.

Terry Beckingham RPT


At 01:40 PM 4/26/2010 -0700, you wrote:
>Well, it does involve a screwdriver and one screw to loosen...so maybe for 
>some it is a bad design.
>
>David Ilvedson, RPT
>Pacifica, CA  94044
>
>----- Original message ----------------------------------------
>From: "G Cousins" <cousins_gerry at msn.com>
>To: caut at ptg.org
>Received: 4/26/2010 1:29:19 PM
>Subject: [CAUT] FW:  Tuners leave a trail
>
>
>
>
>
>
> >Couldn't possibly be bad design, could it!  (?)
> >GC
>
>
> >From: tannertuner at bellsouth.net
> >To: caut at ptg.org
> >Date: Mon, 26 Apr 2010 13:07:06 -0400
> >Subject: Re: [CAUT] Tuners leave a trail
>
>
>
>
>
> >I've seen it on brand new pianos as well.
> >Jeff
>
> >----- Original Message -----
> >From: David Ilvedson
> >To: Piano Technicians Guild ; Piano Technicians Guild
> >Sent: Saturday, April 24, 2010 1:14 PM
> >Subject: [CAUT] Tuners leave a trail
>
> >A little scratch here, a little scratch 
> there...
> >