David Ilvedson wrote: > Again, no screwdriver?... '-] That's how I do it. I'd > mention, I remove everything I can to make it lighter > including action and lower down onto a folded up moving > blanket or block of covered wood so the piano is at a bit > of a tilt. This will make easier to pull it back over... That's it. I use a 4x4 and a pad. It's embarrassing to get one flat on it's end and discover that, evidence to the contrary, I don't have enough lead in my butt to pull it back down, and have to find help. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC