Why couldn't CAUT develop resume builders, i.e., suggested classes and certificates stating that a person attended those classes. For example, attending Steinway seminars should be CAUT suggested classes. as well as Yamaha Little Red School House. The same with Diskavier and PianoDisk seminars. Closer to home, every national or regional seminar should grant proof of attendance to regional classes or annual convention classes for those that want such proof. The certificate could list the classes that the person attended. Such pieces of paper would not only be good for those wanting to get a job at a university, but it would be good for those who already has a position and is wanting to prove to the institution that the technician was participating in professional classes. Richard West On May 14, 2010, at 3:01 PM, Chris Solliday wrote: > Bill, > Well if it is SO easy, then just drop the RPT requirement and you > will find a great deal more support. The RPT franchise can be > marketed to institutions on its own merit. Of course there will be > a few of your supporters who will disagree, but we must look for a > way for the whole organization to participate in additional > certifications. In fact just to get the record straight all > additional certifications should be open to ALL PTG members. Then > it IS as simple as taking some courses and some written tests. (It > was Kent Swafford who said, “I thought this would be simpler.” Or > words to that ...) This gives us the universality and flexibility > to distinguish those in other area of expertise who will not be > tuners as well. And it would allow us to include those very well > trained (factory and other) CAUTs who are not RPTs but might want > to become so if not forced to. > > In the face of self interest and political reality please ask > yourself why the RPTs who will be voting in council would vote to > make a few of their rank RPTs plus, or uber techs, or whatever you > want to call it when you build only on the RPT franchise. Franchise > ownership is a separate issue. And a much bigger prize. > > Why would an RPT who does not do much or no institutional work > agree to giving an RPT a larger status than he or she has? Drop the > RPT component and the endorsement makes sense with a few tweaks. > The elephant in the room is , the CAUT endorsement should be open > to all, as we have been suggesting to you for quite some time. > Continuing to put your head in the sand and continuing to recite > what you hope might come true over and over is probably not going > to work. > > I don’t think btw that Jeff Tanner is unfamiliar with the proposal > as you would digress. You should have been listening to what he and > others have been saying on this issue for years, then maybe you > would be familiar with what is reasonable and possible within the > PTG structure. > > It always amazes me when piano technicians don’t listen. > Chris Solliday > > From: caut-bounces at ptg.org [mailto:caut-bounces at ptg.org] On Behalf > Of Bdshull at aol.com > Sent: Thursday, May 13, 2010 2:37 AM > To: caut at ptg.org > Subject: [CAUT] CAUT Endorsement Requirements Misperception - was > Preaching to the Choir > > Hi, Jeff, > > Your last few posts lead me to think you are not familiar with the > CAUT Endorsement proposal requirements, and it might be that others > have this same misperception too. It would be easy, if one is to > just read Regulations and Codes Article IV, to come to the > conclusion that the CAUT Endorsement might only be attained by > attending the CAUT Academy courses and taking the 4 written tests. > However, this is a mis-read of the proposal. The core of the > proposal is in bylaws. If you don't have the May supplement you > may go to the PTG Page members area, and follow the links - > resources, forms and documents, Council 2010, Organizational/LRP: > > http://www.ptg.org/members/docs/2010/2010_Council_Agenda_Section_4- > Organizational-LRP.pdf > > The only requirements in order to obtain this endorsement are that > one be a Registered Piano Technician, and that one pass a written > test on CAUT-related subjects. The CAUT Endorsement is designed > like a certification, similar to the RPT; preparation for it is > not proscribed but a CAUT Academy is offered with comprehensive > curriculum. This is similar to the RPT itself, where a variety of > paths or combination thereof can lead to the CAUT Endorsement - > trade schools, apprenticeships, the Randy Potter course, the PACE > lessons. > > A CAUT Academy curriculum will be developed and offered, and each > segment will be followed by written tests. This road to the CAUT > Endorsement will be an incredible opportunity to master the > knowledge and skills needed for college and university work. > However, there are no proscribed courses to obtain the CAUT > Endorsement in this proposal. > > I would expect that all of the excellent training programs - the > Theodore Steinway Seminars, the Little Red Schoolhouse, etc, that > you've referred to could be of use in preparing for the CAUT > Endorsement, as they address many of the skills required in the > college and university setting. These courses are limited in > their applicant pool, while the PTG does not, and can not place > anti-competitive restrictions on its certifications. Further, the > CAUT Academy curriculum would be CAUT-comprehensive in nature, > unlike anything else available. > > I would also expect that the CAUT Academy, specifically tailored to > the college setting - and not manufacturer-specific - would be an > ideal preparation for College and University work, as it will be > taught by leading technicians in the field. > > The time may come when the PTG community would approve of > additional testing beyond a written test, but the development of > skills tests is a large project. Testing must meet a number of > standards, and a process of beta-testing would also be required. > Needless to say this has been the subject of considerable > discussion in the committee, as well as in conversations with the > board and bylaws. It was felt that this approach to CAUT > Endorsement requirements would not be onerous or unachievable by > qualified members (RPTs). > > The CAUT Endorsement testing would also provide the candidate with > an assessment of areas needing further training or education. But > there are only these two requirements - RPT status and the passing > of a written test. > > I hope that you might see that this might satisfy your concerns. > Some have considered this a "watered-down" and ineffective > proposal, but your arguments actually make the case for the > proposal as it is presented, not onerous, not complex, not > unattainable, but still a reflection of a commitment to a certain > knowledge base, as well as a commitment to continued growth and > participation in the CAUT community. > > The curriculum component of this endorsement is voluntary. Even if > the applicant doesn't attend the CAUT Academy, the curriculum is > important in that it defines the skills and knowledge base needed > for CAUT piano service, and should be an excellent source of CAUT- > specific training and education. Anyone who hasn't studied the > proposal should look over the curriculum ; they will see the wide > range of areas the CAUT technician works in. At present it is only > summarized in "regulations" as: > > The CAUT Workplace: Administrative topics. > Concert Tuning and Preparations. > Historic instrument Tuning and Maintenance > Special Topics in Servicing Institutional Instruments > > A detailed outline of this curriculum title "Components of > Endorsement" was provided last year to council, and I expect that > similar supporting documentation in the form of of a beta Policy > Handbook with a fleshed-out curriculum will be provided this year, > too. > > Regards, > > Bill > > Bill Shull, RPT, M.Mus. > CAUT Committee Member > > > In a message dated 5/12/2010 3:23:35 P.M. Pacific Daylight Time, > tannertuner at bellsouth.net writes: > Yes, a certificate of merit from CAUT. Not a doctoral degree in every > conceivable facet of the trade plus tangents into other trades. If > nothing > else, schools might also encourage their tech to attend Yamaha and > Steinway > training seminars, which the CAUT degree would not, could not > recognize. And > since there is no way for a CAUT endorsement to recognize other > training > programs considered highly respected and viable by university > faculties and > performing artists, it renders the PTG CAUT endorsement uncredible. > Jeff > > ----- Original Message ----- > From: "David Ilvedson" <ilvey at sbcglobal.net> > To: <tannertuner at bellsouth.net> > Sent: Tuesday, May 11, 2010 8:32 PM > Subject: Re: [CAUT] Preaching to the choir;was University of Idaho > Piano > Tech Vacancy > > > > If schools want to do on the job training, that's what they'll > do. They > > do need to be aware of the talent pool out there and a > certificate of > > merit from CAUT could start their education. PTG/CAUT needs to be > > bombarding music departments with this info. If nothing else, > schools > > might require their tech to attend classes with PTG... > > > > David Ilvedson, RPT > > Pacifica, CA 94044 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/caut.php/attachments/20100514/3d9dc054/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC