Ability to be produced with minimal labor costs in large quanities, all within saleable performance parameters! ES ;-) ----- Original Message ----- From: "Cy Shuster" <cy at shusterpiano.com> To: "Ed Sutton" <ed440 at mindspring.com>; <caut at ptg.org> Sent: Tuesday, November 30, 2010 9:55 AM Subject: Re: [CAUT] Friction (was F..riction) > To flip the discussion, what are the characteristics of a perfect hammer > flange bushing? > > It seems that a goal of the Permafree bushing is to allow a more secure > hammer-flange mechanical connection (e.g. as measured with the flange on > its side on the edge of a bench, moving the hammer up and down against > the "ears" of the flange), but still having low friction (because > otherwise a tighter flange means higher friction). > > --Cy-- > > Cy Shuster, RPT > Albuquerque, NM > > www.shusterpiano.com > www.facebook.com/shusterpiano > >
This PTG archive page provided courtesy of Moy Piano Service, LLC