[CAUT] Fwd: RE: Yamaha regulation specs

[Roger Jolly]

>
>Subject: RE: [CAUT] Yamaha regulation specs
>
>One small point about Asian and European pianos, measurements are normally 
>expressed in mm and not inches. For a top quality job it's best to start 
>with the factory recommended specs.  Yamaha and Kawai rarely need too much 
>tweeking outside of the published specs.
>If some one is looking after a large quantity of Japanese pianos, life 
>will be easier using a metric blow gauge and dip block.
>
>Regards Roger