<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: =
Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=rol=
e_document
face=Arial color=#000000 size=2>
<DIV>Hi, Mark -</DIV>
<DIV> </DIV>
<DIV>You'll find the dags will fit back in place perfectly, even if they - o=
r
the keybed - are splintered. Take the time to figure out which one cam=
e
from which spot and 'dry fit' them in position. Do not clean up the gl=
ue
or splinters; this will help you to get them back exactly into their previou=
s
positions. Reglue one dag at a time. Put some CA on the dag and
maneuver it into position; use a rubber mute or two or three
wedged under the damper tray to hold it in position. Then, not before,=
administer a small dose of 'kicker' around the exposed edges of the glue
joint. Leave the dag undisturbed for a few minutes while you=
go
on to the next one. Done. Easy!
<DIV> </DIV>
<DIV><FONT lang=0 face=Arial size=2 FAMILY="SANSSERIF" PTSIZE="10"=
>~ Tom McNeil
~<BR>Vermont Piano Restorations<BR><BR>346 Camp Street<BR>Barre, VT
05641<BR><BR>(802) 476-7072</FONT></DIV></DIV></FONT></BODY></HTML>