<html> At 08:53 AM 7/22/02 -0500, you wrote: <blockquote type=cite class=cite cite>It worked for me, too, Mike.  You may try water thin CA on the pins later, w/out getting it on the string/pin termination.  Apply w/needle-nose applicator from the back side, away from the string. Lance Lafargue, RPT</blockquote> Hi Lance,                  Roll up a little piece of paper towel, ( kind of like a wee dog ear)  and place it between the notch and strings, it will wick up any excess very quickly. Happy it worked for you. Regards Roger </html>