<html>
<body>
<font size=3>At 02:30 AM 3/22/2006, you wrote:<br>
<blockquote type=cite class=cite cite="">Hi,<br><br>
It is the rod against the dampher lever felts.</blockquote><br>
Hi Don,<br>
Not an uncommon problem. If the Teflon powder is not working for a
significant period of time, it is probably due to glue leeching through
the felt.<br>
The only solution that I have found is to replace the felt. In
doing so, it is important to remember to just use a little dab of PVCE
glue at either end of the felt. Hot hide glue would be my first choice,
but not so practical in the field. There should be no glue directly under
the area where the lifter rod comes in contact with the felt. <br>
Not the kind of news you want to hear. Just one of those jobs
that you and the client has to bite the bullet.<br>
Allow time for some serious damper regulation.<br><br>
Regards Roger</font></body>
</html>