<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:st1="urn:schemas-microsoft-com:office:smarttags" xmlns="http://www.w3.org/TR/REC-html40"> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> <meta name=ProgId content=Word.Document> <meta name=Generator content="Microsoft Word 10"> <meta name=Originator content="Microsoft Word 10"> <link rel=File-List href="cid:filelist.xml@01C6AE55.BF83FFF0"> <link rel=Edit-Time-Data href="cid:editdata.mso@01C6AE55.BF83FFF0">  <title>Message</title> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="State"/> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="PlaceType"/> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="City"/> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="time"/> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="date"/> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="country-region"/> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="place"/> <o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="PlaceName"/>  <style>  </style>  </head> <body bgcolor=white lang=EN-US link=blue vlink=blue style='tab-interval:.5in; WORD-WRAP: break-word;khtml-nbsp-mode: space;khtml-line-break: after-white-space'> <div class=Section1> Thanks, Chris – I thought that might be what you were referring to and I’ve got one, I just never knew what it was called!<o:p></o:p> <o:p> </o:p> - Mark<o:p></o:p> <o:p> </o:p> -----Original Message----- From: Chris Solliday [mailto:solliday@ptd.net] Sent: <st1:date Month="7" Day="23" Year="2006">Sunday, July 23, 2006</st1:date> <st1:time Hour="11" Minute="55">11:55 AM</st1:time> To: College and University Technicians Subject: Re: [CAUT] Agraff levels <o:p> </o:p> <div> invented by Chris Robinson, originally sold by APSCO, now an improved version sold by Pianotek, the Straight Mate is a lever with a plastic roller that attempts to put a bend at the front termination point on all three strings of a unison at once. This improves tone and improves string level but I don't think anyone is currently claiming this is a string leveler the equal of the bubble level. Some techs use it to test the strength of their agraffes (just kidding) but I use it to set the bend generally at pitch, improve the level and then I refine things as Fred has indicated.<o:p></o:p> </div> <div> Chris Solliday <o:p></o:p> </div> <blockquote style='border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt; margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'> <div> ----- Original Message ----- <o:p></o:p> </div> <div style='font-color:black'> From: <a href="mailto:pianotech@nhpianos.com" title="pianotech@nhpianos.com">Mark Dierauf</a> <o:p></o:p> </div> <div> To: <a href="mailto:caut@ptg.org" title="caut@ptg.org">'College and University Technicians'</a> <o:p></o:p> </div> <div> Sent: <st1:date Month="7" Day="23" Year="2006">Sunday, July 23, 2006</st1:date> <st1:time Hour="7" Minute="33">7:33 AM</st1:time><o:p></o:p> </div> <div> Subject: Re: [CAUT] Agraff levels<o:p></o:p> </div> <div> <o:p> </o:p> </div> I would think that you would have to use the string plane itself. Anything else assumes that the plate is parallel to that ‘something else’. BTW, what’s a Straight Mate? I tried googling and only found a device for improving one’s golf swing and lots of gay sites!<o:p></o:p> <o:p> </o:p> - Mark Dierauf<o:p></o:p> <o:p> </o:p> -----Original Message----- From: Chris Solliday [mailto:solliday@ptd.net] Sent: <st1:date Month="7" Day="23" Year="2006">Sunday, July 23, 2006</st1:date> <st1:time Hour="0" Minute="15">12:15 AM</st1:time> To: College and University Technicians Subject: Re: [CAUT] Agraff levels<o:p></o:p> <o:p> </o:p> <div> how about the keybed?<o:p></o:p> </div> <div> Chris Solliday<o:p></o:p> </div> <blockquote style='border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt; margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'> <div> ----- Original Message ----- <o:p></o:p> </div> <div style='font-color:black'> From: <a href="mailto:dltassinpiano@juno.com" title="dltassinpiano@juno.com">dan l tassin</a> <o:p></o:p> </div> <div> To: <a href="mailto:caut@ptg.org" title="caut@ptg.org">caut@ptg.org</a> <o:p></o:p> </div> <div> Sent: <st1:date Month="7" Day="21" Year="2006">Friday, July 21, 2006</st1:date> <st1:time Hour="17" Minute="31">5:31 PM</st1:time><o:p></o:p> </div> <div> Subject: Re: [CAUT] Agraff levels<o:p></o:p> </div> <div> <o:p> </o:p> </div> <div> AND  ...   ALL stages and floors are NOT alike.<o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> SO ...      Don't forget to   "level"  the piano before you use your bubble gauge.<o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> Your strings might  "tilt"  in the direction of the Sun,  just like the earth.   <o:p></o:p> </div> <div> ( aka :  Summer Time --  "Global Warming" )    Performers  "heat up"  when<o:p></o:p> </div> <div> their strings aren't level.   ( Remember =  spell it backwards :  L e v e L ).<o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> This is very important to remember.    How does one level the piano ??<o:p></o:p> </div> <div> Try a longer, straight ( carpenter's ) level across the majority of strings, or<o:p></o:p> </div> <div> from side-to-side across the rim of the piano ( just behind the music desk),<o:p></o:p> </div> <div> or on top of the stretcher.   [ it'll be close enough to check it. ]    Then,<o:p></o:p> </div> <div> Shims under the casters will work, or use a jack ( in the box ) on the low side.<o:p></o:p> </div> <div> ( having a student hold it up on one side won't be stable enough.)<o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> Do all of this  ONLY  ---  if you want it to be "accurate."   ....     Etarucca !!<o:p></o:p> </div> <div>  <o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> Dan Tassin, RPT<o:p></o:p> </div> <div> Asst. Piano Tech,<o:p></o:p> </div> <div> Vanderbilt, Blair SOM<o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> -----------------------------------------------------------------------------------------------------------------------------------------------------<o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> On Thu, <st1:date Month="7" Day="20" Year="2006">20 Jul 2006</st1:date> <st1:time Hour="8" Minute="40">08:40:22</st1:time> -0400 "Becker, <st1:City><st1:place>Lawrence</st1:place></st1:City> \(beckerlr\)" <<a href="mailto:BECKERLR@ucmail.uc.edu">BECKERLR@ucmail.uc.edu</a>> writes:<o:p></o:p> </div> <blockquote style='border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 8.0pt; margin-left:7.5pt;margin-top:5.0pt;margin-bottom:5.0pt'> Joe-<o:p></o:p> <o:p> </o:p> I have a way that works for me to use your bubble gauge near the struts and where there isn’t room between the dampers and v-bar.  I use a short section of flat brass that has been squared at both ends.  Stand it upright on the strings just in front of the damper, with the bottom of the level in solid contact with the top of the brass piece.  I center the bubble, then pluck the strings.  (Different than sitting the gauge on the strings and seeing where the bubble goes.)  Trying to hold both pieces in one hand might feel a little fumbly at first, but if I can do it, so can most other folks.<o:p></o:p> <o:p> </o:p> <div> <st1:City><st1:place>Lawrence</st1:place></st1:City> Becker, RPT<o:p></o:p> Piano Technician<o:p></o:p> College-Conservatory of Music<o:p></o:p> <st1:place><st1:PlaceType>University</st1:PlaceType> of <st1:PlaceName>Cincinnati</st1:PlaceName></st1:place><o:p></o:p> </div> <div> <div style='margin-left:.5in'> <div class=MsoNormal align=center style='margin-left:.5in;text-align:center'> <hr size=2 width="100%" align=center> </div> </div> From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of Joe And Penny Goss Sent: <st1:date Month="7" Day="19" Year="2006">Wednesday, July 19, 2006</st1:date> <st1:time Hour="15" Minute="45">3:45 PM</st1:time> To: College and University Technicians Subject: Re: [CAUT] Agraff levels<o:p></o:p> </div> <o:p> </o:p> <div> Hi Should have proofed<o:p></o:p> </div> <div> Their<o:p></o:p> </div> <div> The thinner vial is inserted into a hole drilled into the 1/4" body of the level with a window that helps make certain the tool is used in the same orientation each and every time.<o:p></o:p> </div> <div> The most often asked question?<o:p></o:p> </div> <div> "Does the piano need to be level?"<o:p></o:p> </div> <div> Yes, but only to determine if the bubble is in the window. If it is, level to the same spot.<o:p></o:p> </div> <div> If it is not, one needs to shim a leg.<o:p></o:p> </div> <div> With uneven agraff,<o:p></o:p> </div> <div> level the strings to the foot of the tool with the least slant, and file the hammer to mate the string.<o:p></o:p> </div> <div> At the struts often one or two unisons can not be leveled with the foot. Eric Schandall showed me how he lays the level on its side under the strut to reach these strings. <o:p></o:p> </div> <div> Eric has purchased 20 or so levels. I think he gives them away to folks who attend Steinway seminars and do not have one <g><o:p></o:p> </div> <div> Joe Goss RPT Mother Goose Tools <a href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</a> <a href="http://www.mothergoosetools.com">www.mothergoosetools.com</a><o:p></o:p> </div> <blockquote style='border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt; margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'> <div> ----- Original Message ----- <o:p></o:p> </div> <div style='font-color:black'> From: <a href="mailto:imatunr@srvinet.com" title="imatunr@srvinet.com">Joe And Penny Goss</a> <o:p></o:p> </div> <div> To: <a href="mailto:caut@ptg.org" title="caut@ptg.org">College and University Technicians</a> <o:p></o:p> </div> <div> Sent: <st1:date Month="7" Day="19" Year="2006">Wednesday, July 19, 2006</st1:date> <st1:time Hour="13" Minute="16">1:16 PM</st1:time><o:p></o:p> </div> <div> Subject: Re: [CAUT] Agraff levels<o:p></o:p> </div> <div> <o:p> </o:p> </div> <div> Hi Lance,<o:p></o:p> </div> <div> To my knowledge string - hammer mating was never done on the level ( sorry ) that it is today.<o:p></o:p> </div> <div> It was more a mater of mating the hammer to whatever the strings were. Sorry if there was a problem when the una corda pedal was used.<o:p></o:p> </div> <div> It may have been Fazioli who was the first to use a level on their instruments. There level was / is <o:p></o:p> </div> <div> a piece of brass H channel with a vial in the top and the base cut so it will cover just one unison.<o:p></o:p> </div> <div> Very light and for me too light. When one plucks the string too hard to test for good mating, the level tends to bounce off the unison.<o:p></o:p> </div> <div> I introduced my first level at the <st1:City><st1:place>Orlando</st1:place></st1:City> national. It was way too light. Only 10 were made.<o:p></o:p> </div> <div> We settled on using a brass blank that weighs about 45 grams and with the vial almost 50 grams.<o:p></o:p> </div> <div> The only real change in the brass model was to use a thinner vial so that the tool would stand up a little better to dropage without the vial popping off.<o:p></o:p> </div> <div> Joe Goss RPT Mother Goose Tools <a href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</a> <a href="http://www.mothergoosetools.com">www.mothergoosetools.com</a><o:p></o:p> </div> <blockquote style='border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt; margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'> <div> ----- Original Message ----- <o:p></o:p> </div> <div style='font-color:black'> From: <a href="mailto:lafargue@bellsouth.net" title="lafargue@bellsouth.net">lafargue@bellsouth.net</a> <o:p></o:p> </div> <div> To: <a href="mailto:caut@ptg.org" title="caut@ptg.org">'College and University Technicians'</a> <o:p></o:p> </div> <div> Sent: <st1:date Month="7" Day="19" Year="2006">Wednesday, July 19, 2006</st1:date> <st1:time Hour="8" Minute="42">8:42 AM</st1:time><o:p></o:p> </div> <div> Subject: Re: [CAUT] Agraff levels<o:p></o:p> </div> <div> <o:p> </o:p> </div> <div> At the beginning of this thread I was concerned about an <st1:country-region><st1:place>Estonia</st1:place></st1:country-region> with tilted agraffes and uneven agraffe/string holes.  It was to the point that I couldn't bend a string enough to compensate for good string/hammer mating. I have seen this on other pianos, but not this much.  <o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> It would be interesting to know who makes agraffes and are the plate makers aware of the importance of a level plane (duh, probably).  With the increase in our world-wide market for parts now, I wonder who makes them.  <o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> The bottom line is that you cannot prep a piano to a high level without this to lay a foundation on.  <o:p></o:p> </div> <div>  <o:p></o:p> </div> <div>  <o:p></o:p> </div> <div> Lance Lafargue, RPT<o:p></o:p> LAFARGUE PIANOS, LTD<o:p></o:p> <st1:City><st1:place>New Orleans</st1:place></st1:City> Chapter, PTG<o:p></o:p> 985.72P.IANO<o:p></o:p> <a href="mailto:lafargue@bellsouth.net">lafargue@bellsouth.net</a><o:p></o:p> <a href="http://www.lpianos.com/">www.lpianos.com</a><o:p></o:p> <a href="http://www.lafarguepianos.com/"></a> <o:p></o:p>  <o:p></o:p> <o:p> </o:p> </div> <blockquote style='border:none;border-left:solid blue 1.5pt;padding:0in 0in 0in 4.0pt; margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'> -----Original Message----- From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of Fred Sturm Sent: <st1:date Month="7" Day="18" Year="2006">Tuesday, July 18, 2006</st1:date> <st1:time Hour="8" Minute="53">8:53 AM</st1:time> To: College and University Technicians Subject: Re: [CAUT] Agraff levels<o:p></o:p> I don't know where Steinway buys agraffes, but they now own Kelly Plate, and they have upgraded that facility to install a computer controlled drilling process. The spacing of agraffes in new pianos is MUCH better in the past two to three years. I suspect the square of the holes (hence lack of cant of the agraffes) is much better, too - I haven't noticed much trouble leveling strings on the few new instruments I have serviced. They used to have Kelly drill their plates. Bad idea.  <o:p></o:p> <div> All that said, perfection of hole drilling in cast iron is iffy at best. The unevenness of the material itself causes bits to chatter, at least in my experience. It's not like drilling brass.<o:p></o:p> <div> <div> Regards,<o:p></o:p> </div> <div> Fred Sturm<o:p></o:p> </div> <div> <st1:place><st1:PlaceType>University</st1:PlaceType> of <st1:PlaceName>New Mexico</st1:PlaceName></st1:place><o:p></o:p> </div> <div> <a href="mailto:fssturm@unm.edu">fssturm@unm.edu</a><o:p></o:p> </div> <div> <o:p> </o:p> </div> <o:p> </o:p> </div> <o:p> </o:p> <div> <div> On <st1:date Month="7" Day="17" Year="2006">Jul 17, 2006</st1:date>, at <st1:time Hour="20" Minute="4">8:04 PM</st1:time>, Willem Blees wrote:<o:p></o:p> </div> <o:p> </o:p> It sounds like we're talking about two different issues. One is the <o:p></o:p> level of the agraff itself, compared to the level of the of the plate. <o:p></o:p> What you claiming is that the plane of the agraff holes are not level <o:p></o:p> with the plate. Which could be caused by poor drilling, or that the <o:p></o:p> counter sink of the agraff hole is not flat, which will cause the <o:p></o:p> agraff to cant to one side when it is tightened. <o:p></o:p> <o:p> </o:p> The other issue is the holes in the agraff, which is what I was <o:p></o:p> referrring to. Although there might be very minute differnces in the <o:p></o:p> plane of the holes compared to the top of the agraff, I think the holes <o:p></o:p> themselves are level. <o:p></o:p> <o:p> </o:p> BTW, does Steinway make their own agraffs, or are they outsourced?<o:p></o:p> <o:p> </o:p> Wim <o:p></o:p> Willem Blees, RPT<o:p></o:p> Piano Tuner/Technician<o:p></o:p> <st1:place><st1:PlaceType>School</st1:PlaceType> of <st1:PlaceName>Music</st1:PlaceName></st1:place><o:p></o:p> <st1:place><st1:PlaceType>University</st1:PlaceType> of <st1:PlaceName>Alabama</st1:PlaceName></st1:place><o:p></o:p> <st1:place><st1:City>Tuscaloosa</st1:City>, <st1:State>AL</st1:State> <st1:country-region>USA</st1:country-region></st1:place><o:p></o:p> </div> <o:p> </o:p> </div> </blockquote> </blockquote> </blockquote> <div>  <o:p></o:p> </div> </blockquote> </blockquote> </blockquote> </div> </body> </html>