<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>[CAUT] Steinway Technical</TITLE>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<STYLE type=text/css>BLOCKQUOTE {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
DL {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
UL {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
OL {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
LI {
        PADDING-BOTTOM: 0px; PADDING-TOP: 0px
}
</STYLE>
<META content="MSHTML 6.00.2900.2912" name=GENERATOR></HEAD>
<BODY bgColor=#d8d0c8>
<DIV><FONT size=2>Jon,</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I'm afraid I can't quite grasp this process. It sounds
like you're rotating the key 90 degrees relative to the pipe cleaner to do both
mortices with one dip into the powder?</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>--Cy--</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=jonpage@comcast.net href="mailto:jonpage@comcast.net">Jon Page</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=caut@ptg.org
href="mailto:caut@ptg.org">caut@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, July 27, 2006 5:22
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [CAUT] Steinway Technical</DIV>
<DIV><BR></DIV>
<DIV>><FONT face=Arial color=#000000 size=-4>I like powdered Teflon in the
bushings. A pipe cleaner works great.</FONT></DIV>
<DIV><BR></DIV>
<DIV>I do as well but insert it into a section of player tracker bar tubing as
a handle.</DIV>
<DIV>With only 1/2" protruding out the end of the handle, the pipe cleaner is
'stiffer'.</DIV>
<DIV><BR></DIV>
<DIV>I've worked out a quick method of application:</DIV>
<DIV><BR></DIV>
<DIV>Dip the end of the applicator into the powder and lightly tap off
excess.</DIV>
<DIV><BR></DIV>
<DIV>With the key in the other hand, apply the powder to the balance rail
bushing</DIV>
<DIV>with your thumb in-line with the mortice slot (important alignment -
you'll see).</DIV>
<DIV><BR></DIV>
<DIV>Flip the key over and apply powder to the front rail bushing, now your
thumb</DIV>
<DIV>will be perpendicular to the mortice slot (removing powder from the
previously</DIV>
<DIV>untouched edges of the applicator). All without having to reposition the
hand</DIV>
<DIV>holding the applicator.</DIV>
<DIV><BR></DIV>
<DIV>Then insert the applicator into the b/r hole, spin, repeat on next key.
</DIV><X-SIGSEP><PRE>--
</PRE></X-SIGSEP>
<DIV><BR>Regards,<BR><BR>Jon Page</DIV></BLOCKQUOTE></BODY></HTML>