<HTML> <HEAD> <TITLE>Re: [CAUT] Baldwin sustain pedal return spring</TITLE> </HEAD> <BODY> Hey, David, I can’t speak for anyone else, but for me Baldwin parts was a pain in the backside before the bankruptcy.  I would take some measurements from the trap lever and keybed and make a trip to Ace Hardware.   If you have trouble with spring noise, you can always weave a strip of bushing cloth up one side of the spring. Regards, Ken Z. On 9/21/06 11:18 PM, "David Ilvedson" <ilvey@sbcglobal.net> wrote: <BLOCKQUOTE>I have a Baldwin SF grand...sorry, forgot to get serial number.   The return spring from the bottom of the keybed to the lever directly above the sustain pedal rod is missing.   Obviously I can make something work, but, is Baldwin parts still in existance?    Quit laughing...    I'm actually thinking about installing some key leads in the lever and it would do the same thing with no possible spring noise... David Ilvedson, RPT Pacifica, CA 94044 </BLOCKQUOTE> -- Ken Zahringer, RPT University of Missouri School of Music </BODY> </HTML>