<html> <body> At 09:22 PM 11/8/2006, you wrote: <blockquote type=cite class=cite cite="">What I want to know is will Barbara set up will work on upright flat dampers. They must cut those out of one block all glued together to use that tough of a glue job. Keith </blockquote> Keith, I don't know about Barbara's setup. What I do is rip off the soft part of the felt, grabbing the blocks with my other hand so I don't bend the wires, then soak the rest (remnants of damper felt, with the glue-soaked cloth) with vodka and leave them about 3/4 hour. Most of the time, they'll then just pull off when grabbed by needlenose pliers. I leave them on the rail, with the action vertical, and drip the vodka into the cloth from the rear. If you don't need to renew the spring cushions, you can save a lot of time by not taking the levers off the rail. Susan </body> </html>