<html>
<body>
Jim, <br>
<x-tab> </x-tab>I've done
this and will do it again soon. I have no problem standing the piano
(action out) on the front of the keybed using 4"X6" blocks
under the stretcher for support and balance. It's also an efficient way
of allowing chemical strippers to do their work during the refinishing
process as everything drips away from the soundboard.<br><br>
best of luck,<br>
Greg Newell<br><br>
<br>
At 12:37 PM 4/2/2007, you wrote:<br>
<blockquote type=cite class=cite cite=""><font size=2>List,<br>
<br>
We need to fit an “L” into an elevator for the 15<sup>th</sup> floor.
Here’s the catch; the piano needs to stand on end to fit in the elevator.
It’s an older, small elevator. Any advice? I’ve heard of putting the
piano on top of the elevator, but I don’t think the hotel would do this.
<br>
<br>
Thanks,<br>
Jim Busby</blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
Greg's Piano Forté<br>
<a href="http://www.gregspianoforte.com/" eudora="autourl">
www.gregspianoforte.com<br>
</a>216-226-3791 (office)<br>
216-470-8634 (mobile)<br><br>
2003,04,05 & 06 winners of <br>
Angie's List Super Service Award<br>
</font></body>
</html>