<html> <body> No baggy included.  The dampers are marked as you notice and the resonant pluck points are painted on the soundboard.  At LCC the manager cleans the strings after each "modern" performance with a rag dampened with spirits.  Seems to work. Yeah the damper heads would be easy enough to emulate.  Pass the white-out...  Little more difficult below the strings on the sound-board. Andrew Anderson At 10:56 AM 5/15/2007, you wrote: <blockquote type=cite class=cite cite="">Does it come with a musically correct bag of plucking tools and cotton gloves?   It sure looks nice and could take care of the sticker issue; perhaps we can prepare damper heads this way ourselves, eh?     pw Andrew Anderson <andrew@andersonmusic.com> Sent by: caut-bounces@ptg.org 05/15/2007 10:04 AM <div align="center">Please respond to College and University Technicians <caut@ptg.org> </div> <div align="right">To </div> College and University Technicians <caut@ptg.org> <div align="right">cc Subject </div> Re: [CAUT] Agraffes and dampers You might suggest to the university that they get a piano from Sauter that comes "prepared" from the factory. Check out <a href="http://www.sauter-pianos.de/english/grand_pianos_classical/omega.html"> http://www.sauter-pianos.de/english/grand_pianos_classical/omega.html</a> and click on the picture link on the lower right. Andrew Anderson At 09:09 AM 5/15/2007, you wrote: Welcome Joe, The "prepared piano" as they call it here at UNL is a pain in the @$$^$%#.!!  Students not only put stickers on the damper heads, but also Sharpie pens and chalk marks, even on the strings, pluck with oiley fingers, quarters, paperclips, staples, screwdrivers, and try anything to get "the right sound"! This gives you lots of practice removing objects from the soundboard and action and keybed!  Unless you're able to teach the instructors on removal of foreign "stuffs" and insist they pass the info to the students, you're out of luck on them not damaging things. Strings and agraffes also get quite a bit of damage as well. Think of it as additional job security..... Personally, I'd like to put a nice tight hitchpin loop around the neck of whoever invented this "music"! 2.  Your second question sounds similar to capo problems in grands.  Perhaps, ( and the more experienced CAUT members will add to this) the agraffes have a termination point problem, either very sharp or quite flat.  It could also be weak string problem or very high tension design problem in Petrofs.  I'm not familiar enough on the tension scale of these pianos, but you might want to look that up as well. Just a couple of thoughts.... Best, Paul Joe Wiencek <jwpiano@earthlink.net> Sent by: caut-bounces@ptg.org 05/15/2007 07:55 AM <div align="center"> Please respond to College and University Technicians <caut@ptg.org> </div> <div align="right"> To </div> caut@ptg.org <div align="right"> cc Subject </div> [CAUT] Agraffes and dampers <tt> Hello list, This is my first posting to the CAUT list.  I have two questions 1:  How do you keep dampers free from damage when modern music requires playing the strings with fingers and the performers paste the damper heads with colored stickers, then remove them and tearing felt, etc. This is at NYU, but my own experience in music school tells me it must be all over. 2:  A  Petrof P131 upright with agraffes to the top has broken every  string from E6-E7.  The break is at the edge of the bearing before entering the agraffe on the speaking side. Any ideas? Thanks, Joe Wiencek jwpiano@earthlink.net tel: 551 358 4006 </tt></blockquote></body> </html>