<!doctype html public "-//W3C//DTD W3 HTML//EN">
<html><head><style type="text/css"><!--
blockquote, dl, ul, ol, li { padding-top: 0 ; padding-bottom: 0 }
--></style><title>[CAUT] treating existing bridges in
restringing</title></head><body>
<blockquote type="cite" cite><font face="Arial" color="#000000">I
would be interested in reading about what you do to treat
bridges </font></blockquote>
<blockquote type="cite" cite><font face="Arial" color="#000000">with
CA or epoxy when restringing. I have a pair of Steinway Ms
that </font></blockquote>
<blockquote type="cite" cite><font face="Arial" color="#000000">I will
be working on this summer.</font></blockquote>
<div><br>
<br>
</div>
<div>Pull the pins, resurface and renotch. Fill the holes with
EpoxyTechnology 301</div>
<div>and paint it on the bridge top, refill holes as it soaks in. The
board is jacked-up</div>
<div>the surface is sealed with 301 thinned with acetone.</div>
<div><br></div>
<div>Re-drill pin holes and install nickle plated pins from
Pianotek.</div>
<x-sigsep><pre>--
</pre></x-sigsep>
<div><br>
Regards,<br>
<br>
Jon Page</div>
</body>
</html>