<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Re: [CAUT] disabling individual notes</title></head><body> <blockquote type="cite" cite>On Aug 15, 2007, at 7:35 PM, Thomas Seay wrote:</blockquote> <blockquote type="cite" cite><br> <blockquote type="cite" cite><font face="Helvetica">Why would you need to pull the stack?</font><br> </blockquote> <blockquote type="cite" cite><br></blockquote> <blockquote type="cite" cite><font face="Helvetica">Just use the same procedure you use for setting key dip, i.e., lift the front of the key up and slip the extra cloth punching over the pin, being careful not to lift too high. In my view, that is the fastest way to do it.</font><br> </blockquote> <blockquote type="cite" cite><br></blockquote> <blockquote type="cite" cite><font face="Helvetica">Tom</font><br> </blockquote> </blockquote> <blockquote type="cite" cite><br></blockquote> <blockquote type="cite" cite>I've never been able to make that work without feeling like I was compromising the stability of the paper or card punching.  When you cut the paper punching, and put creases in it bending it around the keypin, it seems to me to make the regulation unreliable.  So, I've always done it the old fashioned way with the stack off.</blockquote> <div><br></div> <div>I'm not referring to balance rail pins when I suggest raising the front of the key and adding punchings. Only front rail bushings, which just slip right over the top of the pins.</div> <div><br></div> <div>Tom</div> <x-sigsep><pre>-- </pre></x-sigsep> <div>Tom Seay, RPT<br> 6701 North Park Drive<br> Austin, TX 78757<br> 512-454-1452 - home<br> 512-659-6454 - cell</div> </body> </html>