<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:st1="urn:schemas-microsoft-com:office:smarttags" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html; charset=us-ascii">
<meta name=Generator content="Microsoft Word 11 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]--><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="State"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="PlaceType"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="PlaceName"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="City"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="place"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="PersonName"/>
<!--[if !mso]>
<style>
st1\:*{behavior:url(#default#ieooui) }
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal;
font-family:Arial;
color:navy;}
span.EmailStyle18
{mso-style-type:personal;
font-family:Arial;
color:navy;}
span.EmailStyle19
{mso-style-type:personal-reply;
font-family:Arial;
color:navy;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body bgcolor=white lang=EN-US link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Barb,<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>There is a .4 change in action ratio
either up or down when the half punching or balance rail veneer is used to help
correct a high or low R. However, the KR you read on the metrology table
will be about the same with or without the half punching and is a bit of a
challenge to get consistent readings on the jig with the half punching
installed. <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>I have run around the block with quite a
few actions chasing the ratio. I have learned to pull back and readdress
geometry before continuing the chase. The FW ceiling chart is very
useful to keep you from adding too much lead.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Anne <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<div>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabindex=-1>
</span></font></div>
<p class=MsoNormal><b><font size=2 face=Tahoma><span style='font-size:10.0pt;
font-family:Tahoma;font-weight:bold'>From:</span></font></b><font size=2
face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] <b><span style='font-weight:
bold'>On Behalf Of </span></b>Barbara Richmond<br>
<b><span style='font-weight:bold'>Sent:</span></b> Friday, September 28, 2007
3:23 PM<br>
<b><span style='font-weight:bold'>To:</span></b> <st1:PersonName w:st="on">College
and University Technicians</st1:PersonName><br>
<b><span style='font-weight:bold'>Subject:</span></b> Re: [CAUT] measuring
wippen weight</span></font><o:p></o:p></p>
</div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Hi Anne,</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Well, this piano has low KR (4.5-4.6) and moving the capstan
backwards put the heel even closer to the wip flange--adding friction and then
the amount of lead I'd have to put in the keys...well...it seemed like I was
going in the wrong direction. I spent a lot of time trying all sorts
of combinations. The replacement wips lower the friction compared to the
originals. I also feel better about using new parts. The old ones
weren't horrible, but they weren't going to get any younger, either. </span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>The WW turned out to be 20.6. </span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>BTW, is there a way to measure the KR
when using a half punching on the front or back of the balance hole?
I haven't thrown any keys up on the Stanwood gizmo and try, of course.
There's the obvious BW difference, just wondering about the KR number.</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Thanks for your help.</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Barbara Richmond, RPT</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>near <st1:place w:st="on"><st1:City w:st="on">Peoria</st1:City>,
<st1:State w:st="on">Illinois</st1:State></st1:place></span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<blockquote style='border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt;
margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>----- Original Message ----- <o:p></o:p></span></font></p>
</div>
<div style='font-color:black'>
<p class=MsoNormal style='background:#E4E4E4'><b><font size=2 face=Arial><span
style='font-size:10.0pt;font-family:Arial;font-weight:bold'>From:</span></font></b><font
size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'> <a
href="mailto:agaree@admin.fsu.edu" title="agaree@admin.fsu.edu">Garee, Anne E.</a>
<o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><b><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial;font-weight:bold'>To:</span></font></b><font size=2
face=Arial><span style='font-size:10.0pt;font-family:Arial'> <a
href="mailto:caut@ptg.org" title="caut@ptg.org">College and University
Technicians</a> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><b><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial;font-weight:bold'>Sent:</span></font></b><font size=2
face=Arial><span style='font-size:10.0pt;font-family:Arial'> Wednesday,
September 26, 2007 4:45 PM<o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><b><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial;font-weight:bold'>Subject:</span></font></b><font size=2
face=Arial><span style='font-size:10.0pt;font-family:Arial'> Re: [CAUT]
measuring wippen weight<o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
</div>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Barb,<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>If “front heavy” means heel
moved towards the jack, the result is a lower WW. Heel moved towards the
flange will be a higher WW. I put a heel on a rep at an extreme position
towards the flange and balanced it on the scale. I could get as high as a
20 gram WW and then the rep would not stay on the jig (which might be your
original question). The heel position was so extreme at that point, that
one might question whether this design will function well this far out of the
box. <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Anne<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<div>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabIndex=-1>
</span></font></div>
<p class=MsoNormal><b><font size=2 face=Tahoma><span style='font-size:10.0pt;
font-family:Tahoma;font-weight:bold'>From:</span></font></b><font size=2
face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] <b><span style='font-weight:
bold'>On Behalf Of </span></b>Barbara Richmond<br>
<b><span style='font-weight:bold'>Sent:</span></b> Wednesday, September 26,
2007 2:57 PM<br>
<b><span style='font-weight:bold'>To:</span></b> <st1:PersonName w:st="on">College
and University Technicians</st1:PersonName><br>
<b><span style='font-weight:bold'>Subject:</span></b> Re: [CAUT] measuring
wippen weight</span></font><o:p></o:p></p>
</div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Thanks, Anne.</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>I will give your suggestions a try.</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>So, in the great scheme of things, is there something I
should know about front heavy wippens? </span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Barbara Richmond</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>near <st1:place w:st="on"><st1:City w:st="on">Peoria</st1:City>,
<st1:State w:st="on">Illinois</st1:State></st1:place></span></font><o:p></o:p></p>
</div>
<blockquote style='border:none;border-left:solid black 1.5pt;padding:0in 0in 0in 4.0pt;
margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>----- Original Message ----- <o:p></o:p></span></font></p>
</div>
<div style='font-color:black'>
<p class=MsoNormal style='background:#E4E4E4'><b><font size=2 face=Arial><span
style='font-size:10.0pt;font-family:Arial;font-weight:bold'>From:</span></font></b><font
size=2 face=Arial><span style='font-size:10.0pt;font-family:Arial'> <a
href="mailto:agaree@admin.fsu.edu" title="agaree@admin.fsu.edu">Garee, Anne E.</a>
<o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><b><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial;font-weight:bold'>To:</span></font></b><font size=2
face=Arial><span style='font-size:10.0pt;font-family:Arial'> <a
href="mailto:caut@ptg.org" title="caut@ptg.org">College and University
Technicians</a> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><b><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial;font-weight:bold'>Sent:</span></font></b><font size=2
face=Arial><span style='font-size:10.0pt;font-family:Arial'> Wednesday,
September 26, 2007 9:30 AM<o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><b><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial;font-weight:bold'>Subject:</span></font></b><font size=2
face=Arial><span style='font-size:10.0pt;font-family:Arial'> Re: [CAUT]
measuring wippen weight<o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
</div>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Barb,<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>If it is tipping to one side, trim the
damper felt on your scale pan jig to off-set it a bit. You can then turn
the jig around for two different angles. Make sure you have soaked the
jig felt in lacquer to stiffen it and create a bit more friction. You can
also slightly rough up the bottom of the angled flange that sits on the roller
or put a bit of spray adhesive on it temporarily.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Anne Garee<o:p></o:p></span></font></p>
<p class=MsoNormal><st1:place w:st="on"><st1:PlaceName w:st="on"><font size=2
color=navy face=Arial><span style='font-size:10.0pt;font-family:Arial;
color:navy'>Florida</span></font></st1:PlaceName><font size=2 color=navy
face=Arial><span style='font-size:10.0pt;font-family:Arial;color:navy'> <st1:PlaceType
w:st="on">State</st1:PlaceType> <st1:PlaceType w:st="on">University</st1:PlaceType></span></font></st1:place><font
size=2 color=navy face=Arial><span style='font-size:10.0pt;font-family:Arial;
color:navy'><o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<div>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabIndex=-1>
</span></font></div>
<p class=MsoNormal><b><font size=2 face=Tahoma><span style='font-size:10.0pt;
font-family:Tahoma;font-weight:bold'>From:</span></font></b><font size=2
face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] <b><span style='font-weight:
bold'>On Behalf Of </span></b>Barbara Richmond<br>
<b><span style='font-weight:bold'>Sent:</span></b> Wednesday, September 26,
2007 8:40 AM<br>
<b><span style='font-weight:bold'>To:</span></b> <st1:PersonName w:st="on">College
and University Technicians</st1:PersonName><br>
<b><span style='font-weight:bold'>Subject:</span></b> [CAUT] measuring wippen
weight</span></font><o:p></o:p></p>
</div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Howdy,</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>I have some Renner Steinway wips that I'm altering to fit a
Knabe. Be joyful that I'm not going to tell the story of all the testing
I've done on this action. Anyway, besides replacing the flanges
(obviously), I'm having to move the heel backwards (toward the flange).
When the wips were in their original state, the WW was 17. Now with the
heels moved and the little/angled Knabe flanges on, I can't get the wip to
balance so I can get a reading. Do I just hold it
lightly against the "tower?" or tie it with thread or use a rubber
band or just ignore it?</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>This wippen set up is the best (of the many) I've
tried--feels good, less friction. I'm just curious about the numbers. </span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Thanks,</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Barbara Richmond, RPT</span></font><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>near <st1:place w:st="on"><st1:City w:st="on">Peoria</st1:City>,
<st1:State w:st="on">Illinois</st1:State></st1:place></span></font><o:p></o:p></p>
</div>
</blockquote>
</blockquote>
</div>
</body>
</html>