Please remind me where I can order some? I think I'll just use the 3/4's on some icky practice room uprights! Thanks Paul <table width=100%> <tr valign=top> <td width=40%>Jim Busby <jim_busby@byu.edu> Sent by: caut-bounces@ptg.org 05/19/2008 01:47 PM <table border> <tr valign=top> <td bgcolor=white> <div align=center>Please respond to College and University Technicians <caut@ptg.org></div></table> <td width=59%> <table width=100%> <tr valign=top> <td> <div align=right>To</div> <td>College and University Technicians <caut@ptg.org> <tr valign=top> <td> <div align=right>cc</div> <td> <tr valign=top> <td> <div align=right>Subject</div> <td>Re: [CAUT] 3/4" front rail cloth punchings</table> <table> <tr valign=top> <td> <td></table> </table> Paul,   No matter what the set it is/was, I’d consider replacing it with the “Crescendo” punchings. (Wertzen felt. Way better.) The testing committee is now specifying these for action models in testing. We replace them and pianists say how much better the touch is.   Regards, Jim Busby BYU   <div align=center> <hr></div> From: caut-bounces@ptg.org [mailto:caut-bounces@ptg.org] On Behalf Of Paul T Williams Sent: Monday, May 19, 2008 7:30 AM To: College and University Technicians Subject: [CAUT] 3/4" front rail cloth punchings   Hi all, I, by accident, ordered some sets of front rail cloth punchings but received 3/4" diameter.  I might want to send them back, but I was wondering if there is a huge difference in the feel over the 1" dia.  punchings?  I assume the 3/4" dia.  are for uprights, but aren't upright keys' widths pretty close to the same as grands?  I know there are slight variances from make to make be their original design of the width from the width of the whole keyframe.  3/4 would probably be required for 7/8th size keyboards, but why do they really make two sizes? Thanks for your ever-ending wisdom :>) Paul