<font color='black' size='2' face='arial'>Hi Roger,
<div><br>
</div>

<div>Thanks for the input on key bushing with leather.  Nap towards the pin, eh?  Not what I would have guessed (but I have zero experience bushing keys with leather at the moment, so what do I know?).  Do you use hot animal hide glue?  Any special considerations (vs. bushing w/ cloth)? <br>

<div style="font-family:helvetica,arial;font-size:10pt;color:black"><blockquote style="border-left: 2px solid blue; padding-left: 3px;">If my
memory serves me correctly I use 1.1mm.</blockquote></div>
... which would be about .043".  I suppose the appropriate thickness of leather depends, as with cloth, on the difference between the size of the mortise and the size of the key pins (less whatever needs to be figured in for the glue line--and I imagine that leather will be less absorbent of glue than cloth, particularly if the glue is applied to the tanned side of the leather).</div>

<div><br>
</div>

<div>Have you found leather to last substantially longer than cloth?  And as it starts to wear, is there a way to resuscitate it (like there is with cloth)?</div>

<div><br>
</div>

<div>Many thanks,</div>

<div><br>
</div>

<div>Alan Eder<br>
<br>

<div style="clear:both"></div>
<br>
<br>

<div style="font-family:helvetica,arial;font-size:10pt;color:black">-----Original Message-----<br>
From: Roger Jolly &lt;roger.j@sasktel.net><br>
To: caut &lt;caut@ptg.org><br>
Sent: Mon, Aug 29, 2011 8:30 am<br>
Subject: Re: [CAUT] Bösendorfer question<br>
<br>







<div id="AOLMsgPart_1_62d70c2b-6b1e-403a-b31f-b33d25e0fe84">



<br>

Hi Alan,<br>

             
Get your leather from Jurgen at Piano Forte he sells it in several
thicknesses, 0.1mm increments. I use it with the nap towards the pins,
dusted with micro fine Teflon powder. No squeaky leather.  If my
memory serves me correctly I use 1.1mm.<br>
<br>

Regards Roger<br>
<br>

<br>
<br>

At 12:00 PM 8/29/2011, you wrote:<br>

<blockquote type="cite" class="cite"><font size="1">Hi Ted,<br>

</font>
<dl>
<dd>I will be rebushing with leather.<br>
<br>


</dd></dl>I am about to rebush a set of keys with leather, a first-time
experience for me. Â Any tips you would be willing to share? <br>
<br>

Thanks,<br>
<br>

Alan Eder<br>
<br>

<br>
<br>

-----Original Message-----<br>

From: Edward Sambell &lt;<a href="mailto:esambell@yahoo.com">esambell@yahoo.com</a>><br>

To: caut &lt;<a href="mailto:caut@ptg.org">caut@ptg.org</a>><br>

Sent: Sat, Aug 27, 2011 9:42 am<br>

Subject: Re: [CAUT] Bösendorfer question<br>
<br>

Stan,<br>
<br>

I have worked on many Bosendorfers and the keypin diameters were
.135". In fact I am doing one now, and it too has .135" on both
rails. I will be rebushing with leather. The keys are made by Herrberger
Brooks (UK) but this size seems to be common with European
pianos.<br>
<br>

Regards, Ted Sambell<br>
<br>


<dl><br>


<dd><font size="2">From: Stan Kroeker
&lt;<a>smkroeker@shaw.ca</a>><br>


</font></dd><font size="2"><dd>To: <a>caut@ptg.org</a><br>


</dd><dd>Sent: Saturday, August 27, 2011 1:26:03 PM<br>


</dd></font><dd><font size="2">Subject: [CAUT] Bösendorfer question<br>

</font><br>


</dd><dd>Hello all,<br>
<br>


</dd><dd>Have just received a set of Bösendorfer keys from a colleague for
rebushing and am worried that the keypin diameters may not have been
measured accurately.  Is anyone able to share these specs?<br>
<br>


</dd><dd>Best regards from the sun-baked Canadian prairie!<br>
<br>


</dd><dd>Stan Kroeker, RPT<br>


</dd></dl></blockquote>


</div>
 <!-- end of AOLMsgPart_1_62d70c2b-6b1e-403a-b31f-b33d25e0fe84 -->



</div>
</div>
</font>