<html> <head> <style></style></head> <body class='hmmessage'><div dir='ltr'> I just put a set of Ronsen Weickert felt on a Yamaha C3 which yielded excellent results.  Have used their Wurzen AA also.  Nicely shaped hammers and consistent predictable voicing.<br>Henry Nicolaides, SIU Carbondale<br><br><div><div id="SkyDrivePlaceholder"></div>> From: andrew@andersonmusic.com<br>> Date: Thu, 1 Mar 2012 16:46:35 -0600<br>> To: caut@ptg.org<br>> Subject: [CAUT] Kawai KG-2C hammer shank-flange options<br>> <br>> The subject is in the studio of a piano professor and has had its hammers reshaped a few times, and its knucles are the flattest I've ever seen.<br>> <br>> I called Kawai in the hopes they would sell a pre-hung set. No dice. Are original hammers and parts desireable here are is there a hammer you prefer for the job? In this case the piano is in a high ceiling studio with hard walls and floors and I was called in because it was too bright. More than 1/2" of flat on top the hammers definately didn't help...<br>> <br>> What hammers would you suggest sampling for the customer?<br>> <br>> <br>> Andrew Anderson,<br>> Artisan Piano<br></div> </div></body> </html>