<html> <body> Question. Assuming something like an 8' Fortepiano, do these carts extend far enough under to not have a danger of the tail end tipping? Just curious. This looks like something we might could use for our new one. Thanks. Avery At 07:16 AM 12/4/2003 -0500, you wrote: <blockquote type=cite class=cite cite>Hi Jim, Harbor Freight has a similar item for much less. <a href="http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=38074" eudora="autourl">http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=38074</a> Garret Traylor garret@highpointpiano.com <a href="http://www.highpointpiano.com/pages/caut.html" eudora="autourl">http://www.highpointpiano.com/pages/caut.html</a> -----Original Message----- From: caut-bounces@ptg.org [<a href="mailto:caut-bounces@ptg.org" eudora="autourl">mailto:caut-bounces@ptg.org</a>]On Behalf Of Geoffrey Pollard Sent: Wednesday, December 03, 2003 9:53 PM To: College and University Technicians Subject: RE: harpsichord moving? Hi Jim, The supplier here in Sydney is Reflex Handling & Storage Equipment. There is a photo of a very similar trolley at: <a href="http://www.reflexequip.com.au/detail.aspx?Key=14750" eudora="autourl">http://www.reflexequip.com.au/detail.aspx?Key=14750</a> I don't know where they are actually made. Cost here is AU$575 which would be about US$420. Regards, Geoffrey Pollard _______________________________________________ caut list info: <a href="https://www.moypiano.com/resources/#archives" eudora="autourl">https://www.moypiano.com/resources/#archives</a></blockquote> <x-sigsep></x-sigsep> ______________________ Avery Todd, RPT Moores School of Music University of Houston Houston, TX</body> </html>