<html>
<body>
<font size=3><br>
Hi Ric,<br>
I prefer the thinner wire, Install the new wires by dipping them in a
slow cure Epoxy. The thinner wire is easier to regulate and tends
to be a little quieter.<br>
Now I go back to sleep. <G><br>
Regards Roger<br><br>
<br>
At 10:32 AM 1/4/2005, you wrote:<br>
<blockquote type=cite class=cite cite="">Hi folks<br><br>
Doing a rebuild on an Petrof 235 and it looks like I I have a choice of
replacing back check wires with 2.9 mm diameters, or use the existing
size of 2.5 mm along with some resizing of the holes in the keys. The
existing wires are bent in every which way you can imagine and loose in
the keys.<br><br>
What I would like to get opinions on is whether or not any of you have
any preferences in regards to diameter of the wire. Thicker means
stronger... not necessarily a good thing...<br><br>
So whataya whataya ??<br><br>
Thanks<br><br>
RicB<br>
_______________________________________________<br>
caut list info:
<a href="https://www.moypiano.com/resources/#archives" eudora="autourl">
https://www.moypiano.com/resources/#archives</a></font></blockquote></body>
</html>