<html>
<body>
Thanks, Don. <br><br>
I finally found them. They weren't listed with the other reamers, so
at<br>
first, I wasn't sure where I'd bought them. I've had mine a long
time<br>
and had never mic'd them, so I just did and they're fine. Three are <br>
not <i>exactly </i>on the line but just the barest "smidgin"
off. Not enough to <br>
cause any problems, though. <br><br>
Avery <br><br>
At 05:19 PM 5/16/2005, you wrote:<br>
<blockquote type=cite class=cite cite="">Avery,<br><br>
Susan gave the correct part number.<br><br>
I just got another sample set from them, and can tell you that they
are<br>
actually sized correctly now! There was a batch made in which
the<br>
broach sizes were all wrong. If any of you measure the broaches
and<br>
they are not correct, call Schaff and tell them you have a bad set.<br>
They may need to know what month / year you bought them, but they
will<br>
send you a new set.<br><br>
Don<br><br>
> -----Original Message-----<br>
> From: caut-bounces@ptg.org
[<a href="mailto:caut-bounces@ptg.org" eudora="autourl">
mailto:caut-bounces@ptg.org</a>] On <br>
> Behalf Of Avery Todd<br>
> Sent: Monday, May 16, 2005 10:10 AM<br>
> To: College and University Technicians<br>
> Subject: [CAUT] Manino Reamers<br>
> <br>
> <br>
> Don/list,<br>
> <br>
> Who handles these reamers? I have a set but can't remember <br>
> where I got them. I can't find them in the Schaff or Pianotek <br>
> catalogues.<br>
> <br>
> Thanks.<br>
> <br>
> Avery<br>
> <br>
> _______________________<br>
> Avery Todd, RPT<br>
> Moores School of Music<br>
> University of Houston<br>
> Houston, TX 77204-4017 </blockquote><br>
</body>
</html>