<HTML>In a message dated 3/28/03 8:41:05 AM Central Standard= Time, atodd@UH.EDU writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT= : 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">List, Does anyone have any suggestions on the best/easiest way to install a 9' grand onto a grand truck? We're buying two for our 'D's in the major hall here and I've never had to install one under that large a piano. I could hire my movers to do them but if I could do it myself (with help, of course) I'd rather not spend the money. If someone could furnish me with a possible subject line, I'd also be more than willing to search for this in the archives. Surely it's been discussed in the last several years. :-) Thanks for the help, either way. Regards, Avery </BLOCKQUOTE> Avery I use Susan Grahams' box with the jack. Lift one corner, and take off the ca= ster, and put the truck under the leg. Before dropping the leg down, put a p= iece of 2x4 under the truck. This prevents the whole truck from lifting up. = Go to another leg, and repeat. When you get to the third leg, you won't need= to put the 2x4 under it. Then you go back and raise the other legs a little= to get the 2x4's out. You can either just lift it your self, and push the 2= x4 out with your foot, or you can use the box and jack to lift the leg. Save= s the back. Wim </HTML>