<html>
<body>
<font size=3>Hi Jon,<br>
With the Mahg molding I don't think it's worth a hill of beans
worth of difference.<br>
You may want to try drying down the treble hammers a bit and see if warp
gets significantly worse.<br>
Any further twisting and warping 'may have a small effect on
the regulation geometry. Hammer checking, and string fitting.
This could be a bigger concern than the weight??????? But I doubt
it.<br>
Drying should not be a concern with the treble hammers since the top gets
a little juice as a rule.<br><br>
Regards roger <br><br>
<br>
At 06:00 AM 8/11/2004, you wrote:<br>
<blockquote type=cite class=cite cite="">Here's a photo of the top hammer
of a set of Ronsen Wurzen felt hammers.</font></blockquote></body>
</html>