<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 10/19/02 12:55:35 PM !!!First Boot!!!, a440@optonline.net writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Wim,</FONT><FONT COLOR="#000000" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>
<BR></FONT><FONT COLOR="#000000" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Check the flange and balancier pinning friction, if too high the amount of rep spring tension needs to be higher to get hammer rise, resulting in the "bobbling" problem. I'd be afraid that with little or no hammer rise you might run into rep problems or worse, a dead key!</FONT><FONT COLOR="#000000" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>
<BR></FONT><FONT COLOR="#000000" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">David Denison, RPT
<BR>Long Island, NY
<BR>Nassau Chapter-Piano Technicians Guild</FONT><FONT COLOR="#000000" SIZE=3 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>
<BR></BLOCKQUOTE>
<BR></FONT><FONT COLOR="#000000" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>Dave
<BR>
<BR>As a matter of fact, that was one of the first things I checked, when I had trouble with the rep springs. I only did a few of the "bad" ones, and found the pinning to be correct. Thanks for the suggestion, though.
<BR>
<BR>Wim </FONT></HTML>