<html>
<body>
I got mine (almost identical) from Chris Purdy. What goes around, comes
around, <br>
I guess. :-) <br><br>
Avery Todd<br>
University of Houston<br><br>
At 05:16 PM 3/8/2005, you wrote:<br>
<blockquote type=cite class=cite cite="">
<font face="arial" size=2 color="#000080">Hey Alan,<br>
&nbsp;<br>
I think I got it from Eric Wolfley. (w/ some revisions)<br>
&nbsp;<br>
Jim Busby BYU</font></blockquote><font face="arial" size=1><br>
</font><font size=2><b>Policy Regarding Prepared Piano Use<br>
</b>March 23, 1999<br><br>
1.&nbsp; All structural changes to any piano must be approved by and in
most cases performed by the piano technician. This includes removing the
lid or other case parts and attaching anything to strings or soundboard
to modify the sound. <br><br>
2. <b> Marking strings.<br>
</b>Small stickers may be used on dampers or agraffes to mark notes.
Please purchase stickers that are easy to remove such as the small
colored dots. Care must always be used when touching dampers as they are
easily bent. Never use masking tape or any other adhesive that may leave
a residue. The performer is responsible for removing any stickers
immediately after any performance. There should be nothing applied
directly to the strings. This includes white-out, tape, stickers, nail
polish, etc. In some cases chalk may be used to mark steel strings but
never the copper wound bass strings.<br><br>
3. <b> Striking and plucking strings.<br>
</b>Strings may be struck or plucked with fingers or guitar pick. Other
devices must always be a material that will not mar or scratch strings.
On steel strings only materials that are softer than the steel string may
be used, such as brass or aluminum. Copper wound bass strings must also
be struck or plucked with a material softer than the copper. Acceptable
material include wood, plastic, rubber, etc. Never use a steel chisel on
piano strings. As the piano technician, I will be happy to help any
performer select materials that will not damage the piano.<br><br>
In some cases, literature calls for the insertion of screws or mutes
between piano strings. Again, a material softer than the string must be
used, such as brass or aluminum. <br><br>
4. <b> Extreme volume.<br>
</b>There is a fine line to be drawn between passionate musical
expression and outright banging on a piano. Please use good judgment when
playing above a forte. Harsh playing is damaging and will not be
tolerated.<br><br>
5. <b> Common sense.<br>
</b>Most damage to our pianos can easily be avoided by using good
judgment.&nbsp; Please consult with the piano technician or piano faculty
before using unconventional techniques. Usually an alternative can be
found to satisfy both the performer and this policy.<br><br>
-Christopher D. Purdy R.P.T.&nbsp;&nbsp; School of Music&nbsp; Ohio
University&nbsp; Athens
OH&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
<br>
-purdy@oak.cats.ohiou.edu&nbsp;&nbsp; (740) 593-1656&nbsp;&nbsp;&nbsp;
fax# (740) 593-1429<br>
</font></body>
</html>