<html>
<body>
<font size=3>Greetings all.<br>
I solution for pulley keys.<br><br>
Use a set of balance rail pins, Mix 50% PVC-E glue with 50% water.
Swab hole, insert pin from the top of the key, swab around bottom of key
to form a meniscus around pin. Allow 24 hrs to dry. Pin will
be frozen in position. Rotate pin one turn, and it will slide
out.<br><br>
Hole will be sized tp perfection.<br><br>
This piano was a 70's Steinway L with the felt knuckles. All 88 had
been over sized to try and solve friction problems. What a
mess.<br><br>
Roger</font></body>
</html>