<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Ach Du Meine Gute!
<br> Considering all of this why should
one ever bother with new shanks!
<br>-Mike Jorgensen
<p>Jon Page wrote:
<blockquote TYPE=CITE><font size=+0>Check the knuckle height, friction
won't be the only thing you'll worry about.</font>
<br><font size=+0>Two sets from Renner had a .030 range in knuckle heights.</font>
<br> </blockquote>
<p><br>Ron Torrella wrote
<blockquote TYPE=CITE>
<br>Come to think of it, I think I got the impression that the centerpin
you see, in
<br>a fresh box of parts, is actually just a sizing pin. That it's *supposed*
to be
<br>replaced.</blockquote>
</html>