<html>
<body>
<font size=3>At 09:08 PM 7/27/2004, you wrote:<br>
<blockquote type=cite class=cite cite="">Lance, do the knuckle cores line
up with the rear of the jacks in a straight line? Also can you get the
drop and let off to happen simultaneously?<br><br>
<b><i>llafargue <llafargue@charter.net></i></b></font> wrote:
</blockquote><br>
Hi Lance,<br>
There is no single adjustment that fixes this malady. The
jack position,repetition height, blow distance, and repetition spring
tension, are all interactive with each other. Now add
let off, and drop to the mix, just to make life a little more
difficult.<br><br>
Start by checking the back checking/rep spring tension. Next,
move on to jack position, and repetition lever height. (winking the
jack). After this the hammer line needs touching
up.<br><br>
Let off and drop, should be done now, before moving through all the
regulation steps again.<br><br>
Regards Roger</body>
</html>