<DIV>I would, however, did you say why you moved the knuckles rather than the capstans?<BR><BR><B><I>Erwinspiano@aol.com</I></B> wrote:
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR><FONT id=role_document face=Arial color=#000000 size=2>
<DIV> <FONT size=3>List </FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3> I thought I'd post an update of this project.</FONT></DIV>
<DIV><FONT size=3> Last month I posted about needing to move knuckles on a few sets of shanks. All were renner parts for stwys with the 15.5 mm knuckle to center pin distance. This part is almost always a recipe for a heavy touch unless extremely light hammers are used or prepped. </FONT></DIV>
<DIV><FONT size=3> The jig I used is made by Roland Kaplan R.T.T. of San Jose. He was quite generous & loaned it to me for experimentation & to copy if I wish. <STRONG>I do.</STRONG></FONT></DIV>
<DIV><FONT size=3> This simple jig is very accurate & very quick Making both economical to do in terms of time & dollars. I spent 10 minutes setting it up & getting familiar with the function. After cutting a few dozen myself I turned it over to My bright & ever capable 17 yr. old son Jacob. </FONT><STRONG>Kinda proud</STRONG></DIV>
<DIV><FONT size=3> He took a complete set of shanks & removed all the knuckles on the bandsaw . Time 25 minutes. Then he wnet straight to the jig. Time to cut all the slots & in one pass , 20 minutes.</FONT></DIV>
<DIV><FONT size=3> Then he glued in the new parts in about 40 minutes. Total time About 1 & 1/2 hr.. Tokiwa knuckles are $125.00 & Renners are $145.00 Plus Jacob's time</FONT></DIV>
<DIV><FONT size=3> Once the jig is set up the craftsmen made blade I used cut a perfectly fit slot for both Tokiwa & Renner knuckles. It only tore out a small corner of the original rosewood molding. A slower movement eliminated this.</FONT></DIV>
<DIV><FONT size=3> Safety:</FONT></DIV>
<DIV><FONT size=3> I added some small safety rails to prevent <STRONG>any</STRONG> Exposure of the operator to the blade. I'm going to copy the jig & make only minor modifications.</FONT></DIV>
<DIV><FONT size=3> I realize this is a job one doesn't do very often But considering the cost of parts at about $400ish plus the hammers & prep, etc., it can save the client a ton & you can be the hero. If the hammers that came on the shanks with wrong dimensioned knuckle placement are worth reusing the jig allows for that option as well which really save the cost of half an action rebuild.</FONT></DIV>
<DIV><FONT size=3></FONT> </DIV>
<DIV><FONT size=3> How many of us would be interested in a jig like this? Let me know. What would it be worth to purchase a premade jig from Spurlock or Farrel or anyone willing to make it.? Just curious</FONT></DIV>
<DIV><FONT size=3> Cheers</FONT></DIV>
<DIV><FONT size=3> Dale Erwin</FONT></DIV></FONT></BLOCKQUOTE></DIV><BR><BR>Vince Mrykalo<br>University of Utah<p>
                <hr size=1>Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/mail_us/taglines/100/*http://promotions.yahoo.com/new_mail/static/efficiency.html">New and Improved Yahoo! Mail</a> - 100MB free storage!